|Heating Resource:||Steam/Electric/Gas/Diesel||Drying Efficiency:||75%|
|Way To Control:||Button/Touch Screen/Remote||Special Design:||Explosion Resistance/Low Temperature Drying|
Automatic Functioning Fluid Bed Dryer,
quick heating Fluid Bed Dryer,
quick heating fbd dryer
1,The structure of fluidization bed is round so as to avoid the dead angle.
2,Inside the hopper there is a stirrer in order to avoid agglomeration of raw material and forming canal of flow.
3,The granule is discharged through the method of turning over. In this way it is very convenient. The discharging system can be designed as required too.
4,It is operated at the condition of negative pressure and seal. The air is filtered. Therefore it is simple in operation and convenient in clean. It is an ideal equipment that is in conformity with the requirements of GMP.
5,The drying speed is fast and the temperature is uniform. In general, the drying time is 15-45 minutes each batch.
When air is purified and heated, it is introduced from the bottom of induced-draft fan and passed through the screen plate of raw material. In working chamber, the state of fluidization is formed through stirring and negative effect. The moisture is evaporated and removed rapidly and the raw material is dried quickly.
Picture of GMP Standard Automatic Functioning Fludised Bed Dryer in Working
Contact Person: admin