|
Product Details:
|
| Voltage: | 110V/220V/380V/415V/480V | Hertz: | 50HZ, 60HZ |
|---|---|---|---|
| Material: | SUS304/SUS316L | Installation Power: | 1.5KW-55KW |
| Drying Temperature: | 50-150℃ | Weight: | 0.5Ton-40Ton |
| Heating Resource: | Steam/Thermal Oil/Hot Water | Drying Efficiency: | 80% |
| Way To Control: | Button/Touch Screen/Remote | Special Design: | Explosion Resistance/Low Temperature Drying |
| Loading Capcity: | 25KGS/Batch-3000KGS/Batch | ||
| Highlight: | vacuum drum dryer,industrial vacuum dryer |
||
When oil is used to heat, automatic constant twmperature control will running. It can be used for drying iology products and mine. Its temperature of operation can be adjusted from 20-160 °c and within ±2°c
Compared with ordinal drier, its heat efficiency will be over 2 times
| Model | SZG-100 | SZG-350 | SZG-500 | SZG-750 | SZG-1000 | SZG-1500 | SZG-2000 |
| Total volume (L) | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 |
| Loading volume (L) | ≤50 | ≤ 175 | ≤ 250 | ≤ 375 | ≤ 500 | ≤ 750 | ≤ 1000 |
| Rotary speed (r/min) | 3-13 | ||||||
| Motor power (kw) | 0.75 | 1.1 | 1.5 | 2 | 3 | 3 | 4 |
| Rotary height (m) | 1.75 | 2.1 | 2.25 | 2.49 | 2.8 | 2.94 | 2.99 |
| Tank inner pressure (Mpa) | -0.1-0.15 | ||||||
| Clip set pressure (Mpa) | ≤ 0.3 | ||||||
| Working temp.(°C) | Inner tank ≤ 85 Clip set ≤ 140 | ||||||
| Heating media | Steam, Hot water, Heat transfer oil | ||||||
| Weight (kg) | 800 | 1100 | 1200 | 1500 | 2800 | 3300 | 3600 |
| Floor area (L*W) | 2160*800 | 2260*800 | 2350*800 | 2550*1000 | 2860*1300 | 3260*1400 | 3760*1800 |
1. heat source pass through the sealed jacket
2. the heat will be transmitted to the raw material to be dried through inner shell
3. under driving of power, the tank is rotated slowly and the raw material inside it is mixed continuously. then the purpose of reinforced drying can realized
4. the material is at a vacuum state, the drop of steam pressure makes the moisture at the surface of raw material become saturation and will evaporate
5. the solvent will be discharged through vacuum pump
6. the inner moisture of raw material will infiltrate, evaporate and discharge continuously. these three processes are carried continuously and the purpose of drying can be realized within a short time
It is suitable for the raw materials that need to concentrate, mix and dry at low temperature(eg. biochemistry products in chemical, pharmaceutical and foodstuff industries).
1. materials that are easy to oxidize
2. materials that are easy to volatilize
3. materials that having strong heat sensitive or toxic
4. materials that should not destroy its crystal in drying
Picture of Cost Effective Customized Automated SZG Double Cone Vacuum Dryer
Contact Person: Mr. Barney Wang
Tel: +86 15895071546
