Application of SZG Double cone mixing machine / Double-cone mixer for dry powder
1.For mixing dry powder or small granules with good flowability in Food,Chemical and Pharmaceutical industry ;
2.Mixing vessel volume: 180-6000L;
4. Agitator can be equipped to strengthen the mixing effect.
5. Vacuum feeder can be equipped to achieve automatic feeding and prevent dust.
Working Principle of SZG Double cone mixing machine / Double-cone mixer for dry powder
SZG series chemical dry powder mixing machine is most often used for the intimate dry mixing of free flowing solids. The materials are fed into the mixing barrel via quick-open feed port manually or by vacuum feeder. With the rotation of mixing barrel, materials can be completely mixed with high degree of homogeneity. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of mixing.
SZG series chemical dry powder mixing machine is widely used in pharmaceutical, nutriceutical, chemical and food industries for mixing dry powder or small granules with good flowability. The solids being mixed can vary in bulk density and in percentage of the total mixture.
Technical Advantages of SZG Double cone mixing machine / Double-cone mixer for dry powder
1. Mirror polished of inner and outer shell to meet cGMP standard.
2. No blind angle in the V-shells, no accumulation of materials, high speed I-bar, efficient and short mixing time.
3. Mixing uniformity can reach 99%
4. Rotating valve is equipped for discharging
5. Fully integrated motors and controls
6. Can work with vacuum feeding system to create dust-free working condition.
7. Intensifier bars can be equipped for deagglomeration
8. Safety railings can be equipped for protection.
Technical Parameters of SZG Double cone mixing machine / Double-cone mixer for dry powder
Picture of mixer in Working
After Sell Service
Service before sell:
----Provide relative technical data for help equipment selection
----Running pilot test
----Offering advice for equipment selection, material analysis
----Provide flow chart, basic drawing
----Provide technical design
Service in sell:
----Provide factory layout according to contract
----Manufacturing ordered equipment according to the related standard
---- A presentation report of manufacturing situation will be offered every 15days
---- Tracking and supervising in whole manufacturing and transporting period according to the contract requirement
---- Photo of wooden case will be offered, wooden case with standard shipping marks.
---- Photo of freight loading will be offered.
---- A record of detailed delivery list will be offered
---- A record of detailed freight loading list will be offered
---- All of wooden case will be marked serial number, all of attachments will be marked serial number, convenient for client's clearing
Service after sell:
----Send service engineer for help instruct installation.
----Send service engineer for running test at site and training the operator
----Help client for maintenance and repair
----Provide one year spare part
----Quality warranty for two years after sell
Packing & Delivery