|
Product Details:
|
| Hertz: | 50HZ, 60HZ | Material: | SUS304/SUS316L |
|---|---|---|---|
| Installation Power: | 1.5KW-55KW | Drying Temperature: | 50-150℃ |
| Weight: | 0.5Ton-40Ton | Heating Resource: | Steam/Thermal Oil/Hot Water |
| Drying Efficiency: | 80% | Way To Control: | Button/Touch Screen/Remote |
| Special Design: | Explosion Resistance/Low Temperature Drying | Loading Capcity: | 25KGS/Batch-3000KGS/Batch |
| High Light: | Customized Vacuum Drying Machine,GMP Rotocone Drying Machine,Automatic Rotocone Drying Machine |
||
Principle:
Confined to the surface of thermal-energy (such as hot water or low pressure steam the HTF), the heat was passed in the shell dry materials.
In the drive, as slowly rotating the tank, the tank materials continuously mixed, so as to achieve the purpose of strengthening drying.
Materials in a vacuum, steam decline in the material surface water (solvent) reached saturation point and evaporation, and the vacuum pump from the timely recovery. Materials internal water (solvent) continuously to the surface infiltration, evaporation from the three ongoing process, the material in a very short time to dry purpose.
Application:
Apply chemical, pharmaceutical, food and other industries powdery, granular and fiber concentration, mixing, drying and low-temperature drying of materials needed (such as biochemical products more easily applied to oxidation, volatile, thermosensitive, strong stimulation, toxic materials, and not allow the destruction of crystalline materials dry.
| SPECIFICATIONS FOR CONE ROTATING VACUUM DRYER | |||
| Name/model | 100 | 750 | 1500 |
| Volume inside of tank(L) | 100 | 750 | 1500 |
| Loading Volume | ≤50L | ≤375L | ≤750L |
|
Rotary Speed (r.p.m)
|
3-13 | 6 | |
| Motor Power(Kw) | 0.75 | 2.2 | <=35 |
| Occupied area L*W(mm) | 2160*800 | 2560*1000 | 3060*1300 |
|
Rotating Height(mm)
|
1750 | 2490 | 2940 |
| Pressure inside of tank(Mpa) | -0.1-0.15 | ||
| Pressure of Jacket(Mpa) | ≤0.3 | ||
Under driving of power, the tank is rotated slowly and the raw material inside it is mixed continuously. The purpose of reinforced drying can e realizd;
The raw material exists at the state of vacuum. The drop of team pressure makes the moisture (solvent) at the surface of raw material become saturation and will evaporate. The solvent will be discharged through vacuum pump an drecovered in time. The inner moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can be realized within a short time.
1. This rotary vacuum dryer has advanced design, simple internal structure, convenient to clean and easy to handle.
2. The tubes of heating medium and vacuum system are built in the rack in order to prevent artificial damage and difficult clean.
3. The outer wall and rack sealing plate adopt polishing treatment, and the inner container adopts mirror polishing treatment.
4. The materials in the double cone vacuum dryer can be rotated due to the revolution of the machine, which can minimize material water content (≤0.5%).
5. The materials will not stick to the wall of the container. With big drying rate and energy saving, this rotary vacuum dryer can uniformly and sufficiently dry the materials.
6. Condenser and recycling tank are equipped for recovering organic solvent.
7. Our double cone vacuum dryer has three types of heat source, including steam, hot water and conduction oil.
Picture of Cost Effective Customized Automatic Functioning GMP Speed Rotocone Vacuum Dryer
Contact Person: admin
Tel: +8615895071546
